Keine Artikel
-
-
-
-
-
Join the JetiFrance group on facebook
-
-
-
-
Join the Powerbox France community
-
-
-
-
OPTronics - Ibex
-
-
-
-
Service - JetimodelOfficial importer of the Jetimodel product line.
We are able to process warranties and after-sales service for products from our network. We offer various services:- - Antenna repairs
- - Changing transmitter modes
- - Replacement of modules
- - Update
- - Function control
- - Personalization
- - and many more on request.
-
Our Jeti-France servicesTéléchargez le formulaire de demande SAV - Jeti France
-
-
-
JetiFrance
-
-
Vergrößern
Jeti - RX Battery RX - Power Ion RB 5200 2S2P
PI-RB-5200
Neuer Artikel
Jeti Model Power Receiver Battery 5200mAh 2S 7.2V Li-Ion
The power-Ion battery packs are special batteries that power the receiving system and the servos in the model.
The main advantages of Power-ion batteries are they have a high mechanical resistance, due to its metal cell cup and long life. During their operation a load balancer is not needed and if there of a short circuit with a current higher than 150A, the intregial short-circuit protection is activated. The overcharge protection is activated when the charging voltage rises to about 5V per cell. These batteries can operate from very low to very high (-10 - + 60 ° C) temperatures.
Every Power-ion battery pack is equipped with a two-core cable with JR plug and a two-wire line with the MPX connector for connection. For higher currents, we recommend connecting the receiver using the MPX connectors and the JR, also to use the MPX plug as a charging port , Both cables are the same length.
The power-Ion battery packs are supplied with the plastic frame assembly in which the batteries are mounted with the included velcro. This mounting frame is Vibration protected with rubber grommets. Insert the enclosed Brass fittings in the rubber, so that the side with the bearing surface meets the mounting surface, so crushing of the rubber groments is prevented.
Technical data:
| Capacity [mAh]: | 5200 |
| Voltage [V]: | 7.2 |
| Tension de fin de charge [V]: | 8.4 |
| Longueur des câbles [mm]: | 135 |
| Weight [g]: | 203 (avec boitier) / 205 (sans boitier) |
| Dimensions [mm]: | 104x47x50 (avec boitier) / 72x38x38 (sans boitier) |
| Discharge Current [A]: | 20 |
| Short burst Discharge [A]: | 80 |
| Max Charging Current [A] (avec connecteur MPX): | 4 |
Zubehör
-
Jeti SPS 20
47,90 € -
Jeti DPS 40
52,90 € -
Jeti DSM 10 - Dual Switch Mixer
74,90 €
Bewertungen
Aktuell keine Kunden-Kommentare