Keine Artikel
-
-
-
-
-
Join the JetiFrance group on facebook
-
-
-
-
Join the Powerbox France community
-
-
-
-
OPTronics - Ibex
-
-
-
-
Service - JetimodelOfficial importer of the Jetimodel product line.
We are able to process warranties and after-sales service for products from our network. We offer various services:- - Antenna repairs
- - Changing transmitter modes
- - Replacement of modules
- - Update
- - Function control
- - Personalization
- - and many more on request.
-
Our Jeti-France servicesTéléchargez le formulaire de demande SAV - Jeti France
-
-
-
JetiFrance
-
-
Vergrößern
Jeti - RX Battery - Power Ion RB 6200 2S 2P
PI-RB-6200
Neuer Artikel
Jeti Model Power Receiver Battery 6200mAh 2S 7.2V Li-Ion
Power-Ion accumulators are battery packs suitable to power the receiver and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical resistance due to their metal case. The accumulators are also characterised by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, built in short circuit protection is activated. There is also built in overcharge protection which is activated if the charging voltage is higher than 5V per cell.
The Lithium Ion cells will work in very low or very high temperatures (-10 - +60°C). Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
The packs are supplied in a plastic holder and are fastened to it with a Velcro strap. The case itself is screwed to a model using anti-vibration rubber grommets, please note the correct placing of the brass washer. Its wider part should be in contact with the assembly boardto which the battery case is mounted to avoid extruding the material.
Technical data:
| Nominal Capacity [mAh]: | 6200 |
| Nominal Voltage [V]: | 7.2 |
| Charging End Voltage [V]: | 8.4 |
| Length of the leads [mm]: | 135 |
| Weight [gr]: | 230 (avec boitier) / 204 (sans boitier) |
| Dimensions [mm]: | 104x47x50 (avec boitier) / 70x39x40 (sans boitier) |
| Duration Current max [A]: | 40 |
| Peak Current max [A]: | 80 |
| Charge max [A] (avec connecteur MPX): | 8 |
Zubehör
-
Jeti SPS 20
47,90 € -
Jeti DPS 40
52,90 € -
Jeti DSM 10 - Dual Switch Mixer
74,90 €
Bewertungen
Aktuell keine Kunden-Kommentare