MAX BEC 2 is designed to power the receiver and servos in the model.
By buying this product you can collect up to 5 loyalty points.
MAX BEC 2 is designed to power the receiver and servos in the model. MAX BEC 2 is a linear voltage stabilizer with an adjustable output voltage. The output voltage is set using a jumper and in one of four positions: 5.0V, 5.4V, 5.7V or 6.0V. MAX BEC 2 can be powered using NiXX and Li–XX cells. MAX BEC also gives an indication of used capacity of the battery with four LED´s.
An integral part of the MAX BEC 2 is an electronic switch that uses a highly efficient type of MOSFET transistor. The main benefits of the MAX BEC 2 include a high voltage rating (to 12 cells NiXX) and low current in the off state (170 μA). The analog voltage stabilization does not contribute to radio interference.
|Dimensions [mm]||100 x 29 x 16|
|Sustained current [A]||12|
|Peak current (max 30s) [A]||20|
|Operational temperature [°C]||-10 ... 130|
|Recommended input voltage [V]||5,5 - 8,4|
|Output voltage [V]||5,0 / 5,4 / 5,7 / 6,0|
|Idle current [µA]||170|
|Max. power loss [W]||20|
|Number of battery inputs||2|
|Input voltage max. [V]||16|
No customer reviews for the moment.