Mounting base for Jetimodel Receivers Jeti R14
MEZON EVO 50 BEC is a completely universal controller for models of airplanes, helicopters, ships and vehicles for users not only of JETI Duplex transmitters, but also of other RC systems.
Perma-Grit - Contour Block Coarse 140 x 52mm
Perma-Grit - Contour Block Fine 140 x 51mm
Perma-Grit - Five Needle Files with colleted easy grip handle
Perma-Grit - Spar Slotter FINE 3 mm
OPtronics - Fan for IBEX 200/220 Controllers
1x Exhaust pipe with flange for 85 B2
With only 21g, it is the micro servo in our range, digital and full aluminum, the must have for light applicationsDue to its flat shape, it will be preferred for installation in the wings
14 Channel 2.4GHz Receiver
The Voltario T75 is a high performance digital battery switch with advanced telemetry features. It contains a charging circuit and tactile/mechanical switch or RCSwitch functionality. The device is ideal for mid-sized models where HV servos are used without voltage regulation.
Perfect connection between fuselage and wing for 1 servo2 x 0.5mm²,1 x 0.3mm², wire lenght 200 cm
The ISDT BCT-16 adaptor is an essential accessory for users of ISDT chargers like the X16. It allows you to connect up to 16 LiPo or LiHv batteries (2 to 16S) through a single MX3.0 connector, simplifying wiring and enhancing charging efficiency.
An essential accessory for capturing extraordinary shots
The breathable embroidered Opale Paramodels cap is the perfect accessory to enhance the pilot’s performance under a heavy sunshine. Its ventilated fabric and clean embroidered logo provide comfort & style, a must have.
Jeti - TX pad underlay
Batterie émetteur DC/DS 24II Power Ion 10500 mAh
Perma-Grit - Spar Slotter FINE 6 mm
Opale Paramodels Motor and ESC with the Opale Carbon propeller. The Best setup for advanced pilots.
Replacement switch for Jeti DS : 1 Spring DOWN 3 positions
Replacement switch for Jeti DS : 1 Spring UP 3 positions
Precise RC transmitters benefit from all of the features that the Duplex 2,4GHz EX system can offer.
Do you dream of dominating the skies with a large-scale RC paraglider? This complete kit, combining the Split 5.0 wing and the Mike XL pilot, is made for you!
Foam insert for aluminium case. This insert is suitable if you are inserting a DS series transmitter with a tray into the case